Shoemaking Process

1. Warehouse management of raw and auxiliary materials

1, the daily raw and auxiliary materials entering and leaving the warehouse must do well the material account and stock account, and use the microcomputer to manage. 2, feed and deliver materials should be specially managed, so as not to make mistakes; 3, when feeding, there must be quality inspectors to check whether the quality is correct and whether the color is correct.

Two. Cutting workshop management

1, the material should be assigned by the special person and assigned by the leader to the employees. 2. When the leather is cut, it can only be cut by single layer. The GSB-2C hydraulic swing arm type blanking machine or XCLP2-250 hydraulic plane cutting machine is better. 3, when cutting nylon cloth, special cloth, canvas and thinner PVC leather, because the material is soft and can be multi-layered at the same time, the XCLP2-250 hydraulic plane cutting machine or the XCLL2-250 hydraulic Longmen blanking machine is applied.

Three. Deployment center management

1, the distribution center according to the order situation, will cut the good parts arranged neatly, waiting for processing; 2, the cutting parts need to print, peeling, paste inside, hot stamping, etc., are responsible for the distribution center; 3, processed materials delivered to the silo spare parts group, from the warehouse material preparation group to the sewing machine workshop processing.

Four. Management of needle truck workshop

1, the process and staffing configuration of the car help and help in the sewing machine workshop are changed according to the design of the shoe surface. Generally, a sewing machine assembly line can produce about 70-80 units every 8 hours, with about 10-15 hands for all kinds of sewing machines, and a total of 80-95 personnel. 2, when sewing, attention must be paid to the distance between the lines, whether the needle distance is well controlled, and whether it is consistent with the requirements; 3, when sewing, the correctness of the marking points on the shoe parts must be paid attention to, such as failing to follow the correct marks when sewing, and the shoe will not be right after finishing, which will cause difficulties in clipping and affect the quality of the finished shoes.

Five. Shoe sole workshop management

Precision to ensure the beauty of the finished products, high cost of mold, and the design of the shading should be combined with the popularity, so that the elimination time is prolonged and the cost is reduced. The injection materials (PVC, TPR, PU or EVA) should pay attention to their physical properties and ensure the finished product quality 2. Rubber composite bottom production: pay attention to the quality of the natural rubber and strive to be stable; the ratio of various additives and chemical raw materials will affect the physical properties of the sole, and the ratio and characteristics change with the climate and processing time. It should be recorded as reference at any time; the design of the sole must conform to the popular demand of the market; the rubber outsole should be stored in the shade, avoid direct sunlight, and avoid direct sunlight, and use black and white PVC bags to pack, otherwise the aging will affect the quality of the finished products. 1, molding bottom production: should pay attention to

Six. Semifinished product warehouse management

At the same time, the control of the material in the molding workshop is controlled. 3, before the side and shoe bottom are fed to the molding workshop, the semi finished warehouse managers must pay special attention to the quality control and quantity statistics work according to the process flow table. 4, each order must be made up of all kinds of materials, such as the sides, the middle, the bottom, the insole, the inner box, the outer box and the paper label. It can be sent to the molding shop 5. The daily production rotation number should be determined according to the number of the last set, the production workshop can receive 6 of the production schedule, and the schedule of the whole plant schedule 7. 1. Semi finished goods warehouse is the pfer station of the face and bottom process in the production of footwear. 2, semi finished goods warehouse management should be hurried to the sewing machine shop in time according to the scheduled time in the production schedule.

Seven. The management of clipping workshop.

1, the clipping process includes three parts: the front, the middle and the back. 2, the length and the length of the shoe bow should be in accordance with the standard. The color can be used to distinguish the length. 3, when the clip is used, the shoe upper part must be aligned with the shoe last.

Eight. Rubbing and bottom molding.

1, pay attention to the accuracy of the marking board, so that the air pressure is about 0.

Nine, finishing and packaging

1, after the removal of the shoe last, the shoes must be cleaned and cleaned first and then; 2, the sprayed finish must be properly sprayed and sprayed evenly and prominently; 3, put into the insole and be properly fastened; 4, the upper shoe belt 5, the final cleaning and finishing, and the stuffing paper into the toe cap; 6, the final quality check 7, packed into the shoebox or plastic bag 8, and boxing.

Ten. Other equipment needed for shoe production line.

1, cutting and blanking die, according to the design of shoes according to the standardization of cardboard manufacturing; 2, molding used last, can be divided into plastic last and aluminum last, the general production of cold sticky shoes because of the last type of change is more, with plastic last more economical, sports shoes or bulk large casual shoes, to use the aluminum last.