Decorative Technology Of Sports Shoes

The range of sports shoes can be started from the aspects of shape, color and texture of the shoe.

The following is a brief description of the process.

1, playing hole is often used in toe and side.

It is an early and the simplest method of decoration, which can increase decoration and air permeability and kill two birds with one stone.

In general, 2 and vehicle shrug get off the double line to increase the roughness of the line, which appears rough and powerful. When the line is dense, the single line is better, and the flexibility of the line can be increased.

The technology of 3 and car accessories is evolved from the technology of vehicle fake line and has been used so far.

When designing, we should pay attention to the position and shape of the piece, and the selection of material texture and color.

4, if the car is hollowed out, if the car decorations are the relief of Yang Wen, the hollowing out of the car is a kind of relief of Yin.

5 and computer embroidery are mostly used in shoes, tongue, eyebrow, back sleeve and sideways.

Apart from the changes in shape, color, texture and so on, the most prominent feature of computer embroidery is the change in luster.

Because the embroidery line has natural and pleasing luster, it makes the embroidery particularly attractive and attractive, so it can improve the grade and the price of the shoes.

6 and wrapping can make the lines smooth, neat and smooth, not only enhance the intensity, but also highlight the outline of the parts.

The six decorative processes in front are the traditional processing methods in shoe making industry. With the progress of science and technology, some processing methods in other industries are often borrowed, such as screen printing, pfer printing, injection molding and welding in plastic industry, high frequency embossing in leather industry, etc.

The application of new technology has brought about great changes in the appearance of sports shoes, and has also brought new ideas to the design of sports shoes.

7, printing most of the current sports shoes are mostly screen printing.

The operation is simple and the cost is low. In addition to the change of shape, it is more important to enrich the variety of sports shoes through the change of color.

8, differentiation of so-called differentiation is actually the printing process of the printing industry.

It has higher efficiency and better quality than silk screen printing. The advantage is that several colors can be used in one operation, and it does not impede the clarity and smoothness of the pattern, especially when it shows a hazy or gradual effect.

9, plastic dropping and plastic parts are small pieces of products that are produced by injection process in plastic industry and suitable for decoration of sports shoes.

The drop molding is an operation to stitch plastic parts onto the surface.

It is commonly used in shoes eyes, back sleeves, sideways and so on.

10, eagerly, is a method of decorating thermoplastic materials by cutting the pressure on the mold by heating, and "welding" on the parts and producing colored floating patterns.

This process is also a simple and economical method of decoration, with shape change, color change, three-dimensional change and gloss change.

The decorative parts are brighter and brighter than print.

11 and high frequency technology originate from high frequency embossing technology of leather.

To be precise, high frequency is a kind of heating mode. Under the action of high frequency electric field, strong friction and heat are generated between the molecules of the material, so that heat is generated continuously inside the material. At this point, through pressing the mold, a clear pattern can be pressed in a short time without damaging the material.

This process is better than the stereoscopic effect of hot cutting technology, so it is widely used at present.