Textile And Garment Quality Inspection "Hardest Hit"

According to the introduction of P, the Bureau has recently conducted quality supervision and inspection on consumer goods such as < a target= "_blank" href= "//www.sjfzxm.com/" > textile > /a > a target= "_blank", "clothing", "bedding", "down" garments, "less than 230", "leather" clothing, fur clothing and so on, and has sampled 235 batches of products produced by the enterprises, including 96 batches of textile and clothing, 12 batches of bedding, 34 batches of down garments, 63 batches of leather garments, 30 batches of fur garments.

The overcoat and the 43 batch of products made by Jin Hanzi (Beijing) International Clothing Co., Ltd. still failed to meet the standards after the reexamination. The main problems of the unqualified products are: Textile < a href= "//www.sjfzxm.com/news/" > clothing product < /a > the use instructions, color fastness items do not meet the standard requirements, the measured value of fiber content is not consistent with the indication value; the pH value of bedding items and the specification of the use items do not meet the standard requirements; the measured value of fiber content is inconsistent with the indication value; the down weight and fiber content of down garments are not consistent with the measured values; the leather tearing force and color fastness items of leather garments do not meet the standard requirements. The results show that Beijing Wanxin industry and Trade Co., Ltd. produces

< /p >

< p > the 199 batch products produced by 184 enterprises in the field of production were surveyed.

The results showed that the supercharged diesel oil and other products produced by Beijing Jin Shi Lubricating Oil Co. did not meet the standard requirements. The main problems were: the motion viscosity, low temperature dynamic viscosity and low temperature pumping viscosity of vehicle lubricants did not meet the standard requirements; the freezing point, pH value and corrosion resistance items of the engine coolant did not meet the standard requirements; the liquid resistant items of rubber sealing products did not meet the standard requirements.

< /p >

< p > in the spot check of public safety protection products, the quality of 5 kinds of products, such as fire extinguishers, fire doors, special a href= "//www.sjfzxm.com/news/index_c.asp" > labor protection products < /a >, anti-theft safety doors and fire emergency lamps and lanterns, has been checked. The result shows that the quality of fire extinguishers and special labor protection products is good, and the products of spot checks are all qualified.

Spot checks found that the fire resistance properties of individual batches of fire doors were not up to the national standard because of the assembly reasons. Because of the reason that there were no protective steel plates around the locks, the anti-theft requirements of individual locks were not in line with national standards.

Due to the temporary shutdown of enterprises, the sampling base does not meet the requirements of spot checks, and so on, we failed to spot the fire emergency lamps and lanterns.

< /p >

< p > a total of 78 batches of products produced by 67 enterprises of household appliances and electrical and electronic information were inspected. The quality of explosion-proof electrical products was found to be unqualified by spot checks. The main problems were: structural inspection, impact test, cable and ducting device test items did not meet the standard requirements.

< /p >

< p > Beijing Quality Supervision Bureau recently carried out quality supervision and spot check on 7 kinds of building materials products, such as plastic pipes, wires and cables, building safety glass, etc., and sampled 356 batches of products produced by 331 enterprises.

The cable bridge manufactured by Shengda cable bridge Limited company, the steel radiator produced by Beijing annun toughened glass Co., Ltd., the steel radiator produced by Beijing Zhong Xinfeng Industrial and Trade Co., Ltd., and the PVC-U push and pull plastic windows produced by Beijing Tianchen Decoration Engineering Co., Ltd. are not qualified. The main problems are: the conductor resistance items of wire and cable products do not meet the standard requirements; the thickness of the surface protection layer of the cable tray is not up to the standard requirements; the fragmented state of the building safety glass and other items do not meet the standard requirements; the wind resistance performance of the building windows is not up to the standard requirements; the apparent density and compressive strength of the building polystyrene board do not meet the standard requirements; the heat dissipation of the heating radiator does not meet the standard requirements. The results show that Beijing Jing Yun

< /p >